8-Phase battery charger and maintenance unit with automatic temperature and cycle control
Dedicated reconditioning (repairs deep discharge)
Maintenance & charging cycles
Cold charging (Suitable for vehicles in Winter storage)
Suitable for complex AGM batteries
For all types of 12V lead acid batteries (wet, maintenance free, Ca / Ca, AGM and Gel)
The CTEK MSX 5.0 provides 25% more power compared to previous models (5 amps) while still being an incredibly affordable option for all households or vehicle repair shops.
This sophisticated charger uses technology which was previously reserved for industry professionals, making it one of the best and most reliable battery maintenance kits available. The charger completely solves an array of battery problems from deep discharged, empty and sulphuration.
The unique display allows the user to track the entire charging process.
Temperature-compensated charge: The battery can be charged with even more efficiency by adapting the charging voltage to the temperature. At higher temperature with slightly lower voltage, at low temperature with slightly higher voltage. This ensures your battery is always charged at a rate which will not cause any long term damage.
Power Supply Voltage: AC 220 - 240VAC ~ 50-60Hz
Battery Voltage: 2.0V (Minimum)
Charging Current: 0.8 / 5A
Effective Current: 0.65A (at full charging current)
Back-discharge Current: <1.3 Ah / month
Temperature Range: -20° C to + 50° C
Charging Time: 12 hours (for a 60 Ah battery)
Battery Capacity: 1.2 to 110Ah, up to 160Ah for maintenance charge